Makita Work Light

Build a worklight out of a Makita 18v Battery Adapter (https://www.amazon.com/dp/B08ZYFS9QF) and a Nilight automotive LED floodlight (https://www.amazon.com/dp/B00IY3YLCI), using latching switch (https://www.amazon.com/dp/B075VBV4QH)

The adapter will need to be modified by drilling a hole in the top, in order to route the wires up through the top, rather than out the front/back.

Additionally, 4 holes will need to be drilled in order to run 4 #10 screws (I think) through the mount and adapter to connect them together.

Settings:

• Resolution: .3mm
• Infill: 25%
• Supports: Yes

As always, I uploaded the .3mf file for modification :)