Slide Top Tin Organiser

This design is for a common small tin, mine were sourced on AliExpress. The tin itself is The Tin Box is about 60*34*11 mm with internal dimensions of approximately 58*30*10 mm, corner radius is about 5 mm.

I down sized the insert 0.2mm to make this easier to insert, current 1 mm wall design but this could be down sized. This example is printed in PLA with a 0.6 mm nozzel, no supports, brims or skirts.

I wanted to separate a few items of differing size, this is my first draft design… differing inserts and sizes may follow.

If you're interested in the googly eye content of the tins then take a look here… #2wobblyeyes