Rival Artemis Replacement Front Grip, Pins, and Template.

I didn't like the front grip of the Artemis. Like using a soda can for a grip. So I made my own grip. It is small and thin, but it is a one piece. Also, I made it work with printed pins so you don't need to worry about hardware.

I also uploaded the negative I made, so if you want to try and make your own grip, go right ahead.

I ALSO included the Bambu file I used to print. I added a modifier to the handle to print a reinforced structure within that will print at 50% fill, to shore up the regular 25% fill I did.

I also had the pins print at 100%. 

You may also want to play with the position of the seam, as well.