TP-Link Deco (X50) EU Socket Holder

This mount slips over the PSU that comes with the Deco X50 and holds the Deco X50 upright in a standard EU power socket.

The part consists of three components:

1. The PSU sleeve which has a pin which slots into the EU socket to prevent sagging.
2. The Deco holder which mounts to the PSU sleeve and provides a platform for the Deco X50 (or similar)
3. The support bracket. I haven't used it since it doesn't seem needed, but in case of sagging over time it may be useful.

In addition to these parts four DIN912 M3x8 bolts (5.5mm head) and nuts are required. (Only two if the support bracket isn't used)

See second image for installation instructions.