Ellie - The Last of us 2 (HueForge - 4 Color)

Ellie from The Last of Us 2

The print is 150x150 and you can print it with 4 color AMS.

Instruction:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA MATTE eSun Morandi Green Transmission Distance: 5
    PLA Anycubic Brown Transmission Distance: 5
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Morandi Green
    At layer #10 (0.88mm) swap to Brown
    At layer #17 (1.44mm) swap to White for the rest.