Wall mount for the baskets i've made !

Wall mounts for the baskets I made !( https://www.printables.com/model/1153224-stackable-lid-for-wall-mount-baskets )

If you made the baskets smaller with a % in your slicer, make sure u print the mounts the same % size (example : 48% baskets then make the brakets also 48%)

-Single mount model : SHOULD BE PRINTED IN PETG/ABS, ONLY WALLS ,could work with pla but the bracket will most likely flex with time !
-Print no support , should have 100% walls/parameter , print on the side the model comes on.  (NOT MADE FOR 2 BASKETS TRY AT UR OWN RISK)
-only use the better looking bracket for light stuff inside the basket (<17lbs/20lbs if printed full walls petg)

-Multibasket mount : coming soon !