Make Logitech G302/G303 better

1. The Outer wheel  is  designed for replacing the original rubber wheel which became sticky, it can also increase  friction. Nylon is recommeded. Not sure if it matches Logitech G402, if the original one fits, so does this one. Usage:  assemble  with the original inner wheel.
2. The low profile back cover is designed to optimize the handling. The peak of the original back cover is  too rear so that makes the wrist lifts higher,  and the handling is less swift.  This MOD solve these problems,  just try it. Usage: I did not design two rear fasterners as the original one since it's too hard to assemble, I used a M2×5 screw to mount it to the middle frame.
3. The side patch solve the problem that I felt missing something at the right rear corner. Usage: there's a 0.8mm hidden gap between this gadget and the mouse  body, use double side soft glue sticker to stick it.

Stp files are provided so you can modify them yourselves.

If you enjoy this MOD consider supporting me via a donation. 

https://www.paypal.com/paypalme/7s3b