Rustler 4x4 SkyRC GPS Mount

As the title suggests, this is a mount for the SkyRC GSM020 GPS for the Traxxas Rustler 4x4. This was designed with the legacy Rustler 4x4 chassis, but I believe it will fit any other Traxxas low-cg chassis vehicle. If you can print and test it, please comment if it fits!

I printed this in Polymaker Polylite ASA, but anything like PLA, PETG, and any other mostly rigid filament should work.

I used four M3x8 screws, but you could get away with using two M3x6 ones if necessary. It also requires two M3 nuts or any ~2.5mm M3 spacer (I've included a printable one as well). I designed it to print flat so spacers are needed for two of the screws.