BTT Pi V1.2 Mount

This is a remix of the original Raspberry Pi provided by RH3D. When I had printed out the original mount, I noticed that the 4th hole didn't line up and the cooling mount was too short to clear the bits on the sbc. 

The BTT Pi utilizes M2.5 bolts, but you can drill it out slightly to fit M3. Uses the generic DIN rail mounts as well.

Hardware

• 3xM2.5 or M3 20mm long
• 1x M2.5 or M3 6mm or longer
   

Remixes the stock raspberry Pi mount to fit the mounting points of the BTT Pi.