Display Stand for the Zinc Nerf Pistol (118 Design) (Silly Stand)

This is a Nerf blaster display stand for the Zinc Pistol (a blaster made by 118 Design).

There are two versions. One has the bottom “shoe” of the stand facing forward, and the other has it facing backwards. Choose the version that will work best for your blaster's weight balance! 

(I recommend using the FrontBias stand for the Zinc.)

Printing

I recommend you print all these parts at 5 walls, 20% infill. 

If you have poor bed adhesion/warping, a brim might be necessary.

Supports are needed for the magazine catch notches. 

Assembly: 

Print the stand you like, and print the printed reinforcement bar. 

Drip some glue into the hole on the bottom of the stand while holding it upside-down, then push in the bar all the way until it's flush with the bottom of the stand base. 

Then place it somewhere where glue can drip safely while the glue dries.

Donations & Merch

If you like what I do, please consider supporting me! 

I don't charge for my files, so any donations or merch purchases would be greatly appreciated!

• Patreon (Monthly donations)
• Buy Me A Coffee (One-time donations)
• RedBubble My merch shop, full of fun Nerf-y stickers and shirts! 

Credit: Zinc mag originally made by 118 Design.

Display stand for the Zinc Nerf Pistol by 118 Design.