Brush clip for 35 mm vacuum cleaner telescopic tube (e.g. Miele)

Brush clip for 35 mm vacuum cleaner telescopic tube. Fits Miele vacuum cleaners but probably others as well.
1h 55m
1× print file
0.20 mm
0.40 mm
40.00 g
Prusa MK3.5S
3
3
0
29
updated January 16, 2025

Description

PDF

Some vacuum cleaners like Miele brand have an integrated compartment for brush sets. I was fed up with stopping work to get out the brush for quickly cleaning a corner and then installing it back again and doing the same thing several times in every room.

So I decided to make a clip attached to the telescopic tube that holds the brush while I'm working and gives me quick access to it. The clip is designed for tight fit with a 35 mm tube. There's a recessed area inside were I attached a 1 mm thick self adhesive foam that prevents the clip from slipping on the tube. It probably works without it, but I had the foam laying around anyway so I put it there straight away and it works just fine. The brush side is conical from 34 mm at the top to 35 mm at the bottom and should fit any original or aftermarket standard brush.

I've attached the *.step file in case someone wants to remix or modify the fit to specific needs. Feel free to contact me if you need other diameters etc.

Recommended print parameters:

PET-G, 0.4 nozzle (should work with 0.6 or 0.8 as well), 3 perimeters, 30% adaptive cubic infill

Model origin

The author marked this model as their own original creation.

License