Gecko Under-Barrel LED Light Cosmetic Kit
This is a simple cosmetic kit with an optional embedded LED light, designed for the amazing Gecko foam dart blaster by Ehdrien. I wanted to add a few personal touches to my own Gecko build (used in the pictures here); and made this under-barrel attachment that replaces the original lower pic rail.
I designed this kit around a low-cost LED flashlight off of Amazon. The specific light I used can be found HERE.
This model should fit very well. However, the LED flashlight is entirely optional - and you can build the kit on its own, especially if you’re a fan of under-barrel pistol attachments! Additionally, I’ve included “blank” step files for those who wish to tailor it to specific models of compact lights and/or lasers.
I’ve included versions with an additional lower pic rail; and another that mounts to standard picatinny rail, so it could be mounted on any other compatible blaster! You can also use different transparent filaments to slightly alter the look of the front end/light.
BUILD GUIDE:
While a simple process, please download the included build guide file to help walk you through the installation!
You will need the following hardware (for any version):
This has been tested, designed, and printed in PLA/PLA+. All files should come in the suggested orientation; and should fit on any printer with a build volume of 120x120x120mm or larger.
DISCLAIMERS:
Modify dart and dart blasters at your own risk.
If you do build this with an LED light, please be careful and do not shine it directly in your, or anyone else’s, eyes.
I hope you enjoy this little project as much as I enjoyed making it! If you like the work I’ve done here, consider following my Printables page or my Instagram account to see upcoming projects!
The author marked this model as their own original creation.