165mm car speaker pod mount for boats, RV's etc.

Easy printing freestanding pods designed to mount a 165mm car speakers in my boat.I might add grills later, but for…
6
19
0
115
updated January 16, 2025

Description

PDF

Easy printing freestanding pods designed to mount a 165mm car speakers in my boat.

I might add grills later, but for now this looks good with the fancy speaker internals on display.

Use stubby self-tap screws for the speaker mounting, the oval holes in the pod rim are for this. The other holes for sound and style, plus a discreet hole with good access for the cables. There are two 5mm mount holes 25mm apart underneath the base, with a 10mm dia. recess for nuts/screws/washers.

Print as orientated in the STL, no supports needed. I used a translucent filament which gives a nice (to me, anyway..) crazy effect from the infill.

SCAD file included, but not parameterizd for speaker sizes.. sorry :-O

PS: The Car Stereo/Radio holder in the photos is from here: https://www.thingiverse.com/thing:1498900

Print Settings

Printer:

K280

Rafts:

Doesn't Matter

**Supports:**

No

Resolution:

0.2

**Infill:**

10%

Category: Sport & Outdoors

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License