HSW Allen/Hex key Holder - 1.5 to 6mm

This is an hex key holder for the HSW system by RostaP !

Dimensions

It is compatible with allen key from 1.5 to 6mm (1.5/2/2.5/3/4/5/6)

Printing

There is suffisant play everywhere so you don't have to scale anything.

It can be printed without support and is direcly in the good orientation for printing.
 

Mounting

It need 2 “empty insert” from RostaP to be mounted.

Comments

If other sizes are needed you can write me directly !

Check my page for more designs :)