Duplicitous EZ (Official) - LLT Duplex Magnetic Pick Handles

44 Delta brings you the Duplicitous EZ magnetic pick handles available for you to print at home.

These handles make the Law Lock Tools Duplex picks more comfortable in the hand.

Required Hardware

You are going to need magnets! These handles are designed to use 1/4in x 1/16in N52 disc magnets (emphasis on the N52 grading). You have two options:

1. Support my small business (44 Delta) and purchase admittedly over priced magnets that are the same ones I use in the pick handles I sell: Magnets from 44 Delta
2. Source the magnets yourself. Before you head straight to Amazon though, you should be aware that most magnets sold there with a claimed rating of N52 are anything but that (far weaker). Ask me how I know ;)

You will need 6 of these magnets per pick.

Assembly

The assembly is exactly the same as all of the other 44 Delta “EZ” pick handles. Here's a video demonstrating assembly on the Summit EZ handles. Just follow the same instructions for these Duplicitous EZ handles.

Printing

• Orient each half of the pick handle so that the the face (outside) of the handle faces the print bed
• 15% infill
• No supports
• Enable variable layer height and use small layer heights for the first layers (where the fillet around the handle is), and in the area where the two rails above the magnet channels are
• .2 layer height for the rest is fine
• For the multi color models, split the object into its constituent parts and color as needed