HDD Sliders 3.5" for Chieftech BA-01B-B-B Chassis

Plastic sliders for 3.5" HDDs for Chieftech BA-01B-B-B chassis.

Notes

Made 2 versions for pin from original sliders and 1 version for generic screws.
Spares can be stored inside chassis on the interal beam by middle hole.

Models

• HDD-Slider-Pin.stl - For original pin
• HDD-Slider-Pin-S.stl - For original pin (hole little smaller for pressfit)
• HDD-Slider-Screw.stl - For generic HDD screw

BoM (1 set)

• Printed slider: 2pcs
• Original pins or HDD screws: 4pcs

Printing Details

• Color: Any
• Material: PETG, ABS, ASA, Nylon
• Nozzle Diameter: 0.4mm
• Layer Height: 0.1mm recommended, 0.2-0.3mm doable
• Top / Bottom shell: 1mm
• Number Of Walls: 5 (2mm)
• Infill: Gyroid 15%
• Supports: Yes
• Print orientation: flat, as designed
• Brim: No