Info-Orbs Desk Case

Case for Info-Orbs kit, designed to be used with the LCD displays placed horizontally and with headers on the PCB,

This case has different options to add more accessibility when assembled.

• Case with access cutout for 2 different options;
  1  - Panel cutout to be used with included USB C breakout for power only.
  2 - Panel cutout with buttons for RST and Boot and also USB cable connection to the ESP32 board.
   
• Case fully enclosed to be used with the USB C breakout for power only.
   

Parts required-

5 to 9 - M3 x 8/6mm Flat/Countersunk Head Socket Screws

2 - M3 x 8/6mm Socket/Rounded Head Screws

7 to 11 - M3 x 4mm Threaded Inserts

Preparations-
Assemble the Dev kit with the displays placed horizontally and using headers on the PCB

Instructions for case front-

• Install the Spacer on the Displays.
• Insert the Buttons on the Case Front 
• Place the Spacer/Displays on the Case Front (try to not force it or that might damage the screens)
• Use the clips to secure the Spacer/Displays to the Case Front
• Use screws to secure the PCB