Dummy 13 GU10 Lamp Remix

I remixed the lamp head for strength and a snug fit.  I remixed the backpack to allow for a rocker switch. 

All parts are oriented correctly and the correct size, but the Dummy 13 parts must be printed at 250%.  You will need supports for all files except the head neck socket and the backpack wire hole cover.  I used 3 walls and top/bottom layers with 20% infill.  I printed using ASA for strength. The neck socket that snaps into the lamp housing (head) is a tight fit and will need a lot of force to insert.

You will also need some soldering skills to connect the wires to the switch and plug. Printing a base will make the lamp more sturdy.

Here's a link to the switch and GU10 socket:

https://www.aliexpress.us/item/2255800845721307.html?spm=a2g0o.productlist.main.3.278fsnHMsnHMUY&algo_pvid=c01ba9fd-1e24-4173-adf9-cb7e519842b0&algo_exp_id=c01ba9fd-1e24-4173-adf9-cb7e519842b0-1&pdp_npi=4%40dis%21USD%210.82%210.82%21%21%210.82%210.82%21%402101e07217368323410391341edd20%2110000013607659399%21sea%21US%21184623464%21X&curPageLogUid=Fmz6S2Ji0Wb4&utparam-url=scene%3Asearch%7Cquery_from%3A

https://www.amazon.com/dp/B07GVB2P2N?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

I remixed the lamp ring to allow it to tighten as you twist it.  I also beefed up the neck socket that attaches to the head as well as the hole it goes into.  In addition, I remixed the backpack to allow for a mini 3A 250v AC mini KCD1 2 Pin 250V 3A 6A Switch (8.5*13.5mm) as well as a wire hole cover that snaps in at the bottom. I extended the backpack peg to fit all the way into the back of the figure for a more snug fit.