Umbelical cable support for voron 2.4 for Bigtreetech EBB can bus

I have designed my own version of the Unbelical cable, the back is attached in place of the Z chain guide as I feel the middle is the best place to attach the cable (many alternative designs attach it to the side). The part connected to the Clockwork was designed starting from the models provided by Bigtreetech even if in the end it was completely distorted

For assembly you will need some M3 X D5 X L4 threaded inserts (Voron type)
and some M3 screws of adequate length.

As a support for the cable I used a 3mm nylon thread like the one used in the Prusa, bent at both ends to fit into the printed parts (see photo). nylon thread can be found by purchasing a 3mm electrician's probe.

example link: https://www.amazon.it/RUNCCI-Sonda-Tiracavi-Diametro-Trasparente/dp/B07L7KJG6P/ref=sr_1_32?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dib=eyJ2IjoiMSJ9.Cg4bojh_fo3X8IDDFl92U5-LrcAX5d6DbcykG7_Xoi6rDgisWcO-C3rNAf9_FuvllVEkf73mq7MES3QfkqHciMcQsCK1wNlIqRY3fd-S7jTcwT3JqKL7ipNwGuLqbCCwi5o30xk25Zp3pqMb7KbMzlJmpL-ND1oxks-y8XjM9XEx0zCyN_qNhAcSb9SSAEDR3kkPyTHGOKAf7lG_B68hHZL16RqcGaNraeDQW6cP-hAlsQLZI1eKGvgekV_U-Xbnw4rvIU1fpL172-GCEakvj4_m9is7GA0ZqwqQHb1936Mc5ZXHHfGY15DcvRgqPjnxBxq8TN-2yENSvtZEpSq-UWa3328sLZpZxK4mrhTJL_gBazeIXb-sUNzPGc9Uv8xLFBKdKhY9Td1DUTJLItHQIMJkSbM0dfQsxY7m4tOMCMKRysdXO-WcREkNJe2x7fi1.pRZHOlxJIuTobMNi04L0OHZ6KmkTiiOoo8ad3cTNnAY&dib_tag=se&keywords=sonda+da+elettricista+3mm&nsdOptOutParam=true&qid=1736794805&sr=8-32

for the cable covering I used a fabric sheath (I used a 5mm size which is a little tight, you should try with an 8mm one)

example link: https://it.aliexpress.com/item/1005002104858752.html?spm=a2g0o.order_list.order_list_main.649.5f4e3696jVLpgd&gatewayAdapt=glo2ita