Remix - Larger Console Tray for Honda Passport/Pilot/Ridgeline

Remix with minor changes for increased strength and rigidity. This console tray is larger than the OE similar part.
10h 56m
2× print file
0.20 mm
0.40 mm
161.00 g
8
17
0
154
updated January 16, 2025

Description

PDF

Remix of dMosher's design “Larger Console Tray for Honda Pilot or Ridgeline”, with minor improvements.

This should be compatible with the following vehicles that use “Base Tray” part number 83407-TG7-A01 or 83407-TG7-A02:

  • 2016-2022 Pilot
  • 2017-2023 Ridgeline
  • 2019-2022 Passport

 

Recommended print settings:

  • Material: PETG
  • Layer Height: 0.2 mm or less
  • Infill % : 50% or more
  • Supports: Yes, On build plate only (Organic/Tree)
  • Print Orientation: Default as modeled
  • Brim: Recommended
  • Paint seam locations as desired

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

  • Increased thickness to retainer clips and tabs to increase strength, while maintaining compatibility with the interface dimensional constraints:
  • Added fillets to throughout, to improve stress distribution at corners:

 

  • Closed off these holes that were near divider walls for strength and aesthetics:

 

License