Turntable for Ceramics Pottery

Simple 90mm and 120mm turntables for painting/carving ceramics.  Designed to be used with a standard 608 bearing glued into place.  Glue the center to the top side with the stem, glue the outer wheel to base.

It's helpful for the base to have some weight, so I recommend using higher infill in the base section or filling with weights during printing if you have them.

I've included STEP files if you want to adjust the size of the base/top

I used the bearing listed here: https://www.printables.com/model/127509-608-bearing-print-in-place