1/10 scale offroad utility trailer

This is just a simple 1/10 scale off-road utility trailer. It has a trailing arm suspension, and is tested to be trail/off-road ready, and is sized around 1.9 1/10 crawler wheels. Print the frame and suspension components in PETG at  least 80% infill. the other stuff can be PLA at least 20% infill.

Hardware needed:
-assorted M3 screws
-M3 nuts
-5x16x5 bearings x2
-1.9 1/10 crawler wheels x2(the thinner the better)
-springs x2
-M3 ball joint x1
-M5x20 bolt x2
-M5 nut x2
-some outdoor waterproof glue
-butcher string or fishing line
 -3M 3mm spacers x4