ESP32 Enclosure with INMP441 mounting for WLED setups

An ESP32 enclosure for WLED setups with an optional housing for INMP441 I2S digital microphone for soundreactive-awesomeness. The ESP32 boards that I use are from AZDelivery (Amazon Link)

The enclosure has snap-on cover and two design options, one with mounting wings for screwing it into desks (see attached picture) or without. I often print those in PETG or ABS-GF.

Note that you'll need supports for printing the version that has mounting brackets. Supports are only needed to support the overhangs of the mounting wings.

If you need a mounting bracket for your LED aluminium profiles, check out my design