Raspberry Pi Case for a Pi Zero 2 W(H) with mounted UPS HAT (C) [updated]

A base Raspberry Pi Case for a Pi Zero 2 W(H) with mounted UPS HAT (C) (Uninterruptible Power Supply) by Waveshare.

1h 46m

3× print file

0.15 mm

0.40 mm

38.00 g

Prusa MK4S & MMU3

208

updated February 23, 2025

Description

This is a base Raspberry Pi Case for a RaspberryPi Zero 2 W(H) with mounted UPS HAT (C) (Uninterruptible Power Supply including I2C) by Waveshare.

Update: replaced the connector doors.

Settings	Value
Infill	25% (adaptive cubic)
Perimeters	2
Layer Height	0.15 mm Speed
Material	PETG / PLA
Supporting Material	only overhangs / organic
Comments	printed on MK4S with MMU3 FW6.1.4/ FW6.2.1
Ironing	no (not needed, but creates a cleaner surface)

Feedback is welcome.

Share your makes!

The author marked this model as their own original creation.