Slide-on mount for small cameras (3/8")

Created this slide-on camera mount to attach a baby camera (with a 3/8" screw) on top of a closet. It easily slides over a shelf with a thickness of 18 mm. It points down at an angle of approximately 50 degrees. 

In my case, I mounted this on top of an IKEA PAX closet.

After printing, take a 3/8" camera screw of at least 8 mm.

Print settings:

• Layer height: 0.2mm
• Material: does not matter
• Infill: 100% (the stiffer, the better)

Printed this on my Bambu Lab X1C in white PETG.