Improved BeyBlade X Dual Proto Launcher

needs 2 M2x12 (or longer) screws

insertion of launchers is counter-intuitive: try it the other way around (last photo)


//Edit: as suggested by @samweiss_839166 I added another version for heat set inserts (M3x3x3) and flathead screws.
Also, I added a version with printed threads (M3).
Untested by me, I took dimensional recommendations for the inserts from CNCKitchen (4mm hole size, 1,6mm walls) and also confirmed dimensions with parts from aliexpress.

• pressfit for rods for ripcord connector no glue needed anymore; also aligned them
• ripcords sit tighter - doesn't fall apart easily anymore
• launcher sit more thight with screwed part - removal/insertion possible without loosening screws
• few other little improvements, like chamfers and fillets for nicer handling, beefier overall