Cup coaster inspired "Godzilla" movie Tōhō Studio

Cup coaster inspired "Godzilla" movie by Tōhō Kabushiki-gaisha.

Size 80x80mm (3.15''). 

Three colors.

Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mm

The Model is 80.01x80.01mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 3mm and the Actual Depth is 3.2mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Blue Gray Transmission Distance: 3
PLA White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #09 (1.48mm) swap to Blue Gray
At layer #15 (2.44mm) swap to White for the rest.