LePetitChef Magnet (parametric)

The model requires by default an 1x8mm magnet but you can change this easily in the provided fusion file. You can always secure the magnet in place with a little bit of glue but it should be a press fit.

[FR]: Le modèle représente le logo (simplifié) de “LePetitChef” qui as eu une période assez chaotique mais que j'espère seras capable de devenir celui qu'il veut être.

[EN]: This model represents the (simplified) logo of “LePetitChef” that had a pretty chaotic period but that I hope will become the person he was to be.

LePetitChef : https://www.twitch.tv/lepetitchef

Printing Information:

Print this model with the "magnet hole" up

[FR]: Bien que ce modèle soit libre d'utilisation, prenez en compte que le logo est la propriété de LePetitChef et que vous devriez demander la permission si vous voudriez l'utiliser de façon commerciale.

[EN]: While this model is free to use keep in mind that the logo is the property of LePetitChef so you shoud should ask his permission would you want to use it commercially.