Mount for wireless rear speakers to standing lamp

I didn't had(/wanted to waste) space to add seperate speaker mounts, also I didn't wanted to screw them to the wall. As I have the Ikea NOT behind my couch, I like indirect light much more, I designed a mount for my Samsung SWA-9500S.

Note:

- Not included in the files is a 40 x 50 mm (40 x 45 mm for TÅGARP) and 1 mm high TPU layer to have an anti-slip layer between the lamp and the mount. Just create it via your slicer. 

- the damper should be printed in TPU I'm not sure if it useful or not, but I thought better safe then sorry

After printing you push in 4 M3 nuts to the front model, place the damper between the speaker and the front and screw it together with a 1/4-20 screw (about 20 mm long), then you hold the anti-slip layer and the front against the lamp pipe, screw on the rear with 20-30 mm M3 bolts together and your finished.

Ikea is not selling the NOT lamp anymore and the new TÅGARP is 2.5 mm thinner in diameter, therefor I added a version for this as well.