Screwdriver organizer
Description
PDFScrewdriver organizer
A screwdriver organizer with a minimalist aesthetic. It can hold up to eight screwdrivers of varying sizes. The bottom has four 6mm diameter, 3mm deep holes for magnets.
For users who require different hole sizes, I have added a STEP file. This model does not have any holes for screwdrivers or magnets. It should be easily editable with any CAD software.
Printing settings
- layer height: 0.2
- perimeters: 2
- infil: 20%
To be on the safe side, I would recommend using tree supports for the critical areas.
The optimal orientation is on the back side, as shown in the image below.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
The model is slightly larger and has different hole sizes than the Inbus Table Stand. Additionally, I've added an organic structure. To prevent the model from tipping easily on machine surfaces, there are holes for magnets.
