WinWing Ursa Minor - Desk Mount

Create your own, winwing ursa minor desk mount.

Hardware required (for 1 stick holder):

• 4pcs: 20x20 aluminium profile corner brackets
• 4pcs: M5x10mm screws
• 8pcs: M5x8mm screws
• 5pcs: M5x12mm screws (2 for winwing, 3 for toggle clamp)
• 12pcs: M5 T-Slot nut
• 3pcs: M5 Hex Nuts
• 1pcs: GH-301AM Toggle clamp (5.5mm drill bit to make holes bigger for M5 screws)
• 1pcs: 20x60 aluminium profile - LENGTH: 85mm
• 1pcs: 20x60 aluminium profile - LENGTH: 240mm
• 1pcs: 20x60 aluminium profile - LENGTH: 250mm
• Optional: Rubber tape for better desk adhesion

Hardware example(what i used):

• https://opl.si/trgovina/alu-konstrukcije/alu-profili/alu-profil-20-x-60-u6/
• https://www.aliexpress.com/item/32870543302.html
• https://www.aliexpress.com/item/1005003023734101.html (Size: 20-M5)
• https://www.aliexpress.com/item/1005005933087150.html
• https://www.aliexpress.com/item/32810852732.html
• https://eu.store.bambulab.com/en-si/collections/adhesives-tapes/products/adhesive-foam-sponge-strip-roll

For profile covers i printed this(scaled to 101% for better fit): https://www.printables.com/model/1060193-20x60-cover