1993 Subaru Shifter Bushings

A shifter bushing part that I struggled to get my hands on for my 1993 Subaru Liberty (BC7) at a reasonable price. So i got my verniers out and made some quick 3D models.

The OEM part number for this model is based off of 35035AA030 and 35035KA030.

35035AA030 is used on the shifter itself on the cabbin and the linkage side of the uni joint.

35035KA030 is used on the master selector arm on the transmission side of the uni joint.

Please keep in mind if you are going to make these parts yourself, you are using this model at your own risk. Use a high temp plastic as if this part softens around 150*C you may loose control of your shifter!

Use 100% concentric infill (circular infill).

If you are chasing for tight tolerances please find out the shrinkage factor your filament uses.

Here is a good guide on how to account for filament shrinkage: https://filament2print.com/en/blog/warping-contractions-3d-printing