Insta 360 ONE R boosted battery (DIY)

This is a homemade boosted battery for Insta360 One R. It's cost is about 5€.
The capacity is about three times the original battery. It has an external charging port (for me type C, but you can choose any other) with red light wile its charging and blue light when it is fully charged. I recommend charging the battery disconnected from the camera, although the charging module allows you to do it with the camera connected. For that you can use any smartphone charger. I add a diagram connection to explain the wiring.

You should use this battery alwais with the especific 3D printed case I've designed (horizontal & vertical version in the files) because the battery doesn't lock itself like the original one.

I have been testing it for a week and it works very well. The autonomy is amazing!

Vídeo here: https://youtu.be/w8g8kzxPsD8

3D printed parts:

-Lower battery case
-Upper battery case
-Complete horizontal camera case (with and without logo)
-Complete vertical camera case (with and without logo)

Shopping list:

• 3000 mah 18650 Battery --> https://es.aliexpress.com/item/32835795441.html?spm=a2g0s.9042311.0.0.274263c0y4iX7m

• Charging module (choose C-Type) --> https://es.aliexpress.com/item/32649780468.html?spm=a2g0s.9042311.0.0.274263c0y4iX7m

• Pin conectors (CHOOSE 0.5mm trickness!!!) --> https://es.aliexpress.com/item/32882063386.html?spm=a2g0s.9042311.0.0.274263c0p7vOLX

  Print Settings

Printer:

Prusa clone

Rafts:

**Supports:** No

Resolution:

**Infill:** 30% Filament: any PLA, PETG, ABS ... any

Notes:

How I Designed This ===================

Category: 3D Printing