Anubis color lithophane

This is my first attempt to make a color lithophane. It's round shaped, it has a diameter of 200mm and depicts the ancient Egyptian god Anubis.

Print in 0.08mm layer height with 1st layer 0.16mm

1st to 6th layer (0.56mm) - white

7th to 11th layer (0.96mm) - orange

12th to 15th layer (1.28mm) - copper

16th to 18th layer (1.52mm) - brown

19th layer to top - black

There is also a hieroglyph nameplate you can print by first printing Anubis hieroglyph.stl and then print Anubis nameplate.stl over it. Don't forget to set Z lift or Z hop to 0.7mm, otherwise it won't print correctly. For displaying you can use this model: https://www.printables.com/model/734650-frame-with-base-for-200mm-round-lithophanes 

Hope you like it

Source of artwork: pxfuel.com