Fidget: Gears Fidget

The model is available with 3 different gears with 2:1 ratio: spur, helical and double helical, you pick one you like the most.

How to print: firstly, print two gears and then a base with a pause* on 7.8mm, on pause place two gears and complete the print. It all takes around 15-20 minutes to print.

It’s fun to spin those with compressed air, be careful ;-) 

*I would suggest to add a small purge tower and make it to print before the layer that does after you insert gears. It will make all oozes not effecting the actual print. Added an example .3mf file.