OddityRC Toothpick dual battery holder

Designed to mount two 2s batteries under the OddityRC toothpick drone frame.

Compatability: It has only been tested on the 5-inch version; however, it should fit the 4-inch version as well. Check dimensions for compatability with other frames. 

Dimensions: 

• 20x20mm mounting
• Holes for M2 screws

Hardware: 

• 4x M2x12 screws
• 4x M2 nuts

Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee.

Filament / Print instructions : TPU - 100% infill, Print with Tree supports at an angle as shown in this picture: 

Change Log: 

Rev 01: Slightly thicker walls for more durability, flat surface on the side to glue an LED light onto.