Makita Router lipping guide

An add-on for Makita trim routers, that makes flush-trimming of lippings and edgins easier
2
10
0
137
updated January 8, 2025

Description

PDF

This is an adaptor for use with Makita trim routers (and clones, eg Katsu).  It fixes to the trim base of the router, which should be fitted with a bearing-guided flush trim bit.  The adapter provides a much larger guide that runs on the surface that is being lipped, and reduces the tendency of the router to tilt.

In addition to the 3 printed components, the device requires the following hardware:

  • a piece of M6 studding, approx 160mm long;
  • a piece of 6mm ID/8mm OD steel tubing, approx 140mm long
  • 1 M6 full nut
  • 2 M6 Nyloc nuts
  • M6 washers

No special printing requirements - PLA is fine.

A STEP file is included, showing all the assembly details

Tags



Model origin

The author marked this model as their own original creation.

License