SV08 bed remount improved for printing

I remixed the bed mount to allow for easier printing and easier alignment of spacers
4
15
0
253
updated January 8, 2025

Description

PDF

It was quite difficult to line up the spacers when mounting the bed, and therefor a tedious process when adjusting the taco bed. 

 

i made what i think is an improvement of an already brilliant design.

 

the spacers i used are the regular spacers often used on POM wheels. 8mm height and width. 

 

print a tpu ring for each of the bed screws, and adjust the height in the slicer for the middle section depending on how bad your taco bed is.

 

use the original build plate alignment

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

Made it easier to print by removing the bottom spacers for the 6 mounting holes and allowing them to be printed seperately. Made a hole for inserting spacers that help keep them in place while mounting the bed. Added tpu rings to place in the spacer holes to allow adjustment by tensioning the bed screws. Also raised the skirts 1 mm to create a cleaner look. 

also lowered the middle cylinders to allow space for some bed insulation.

License