I have an HP Color Laser Jet Enterprise MFP M480 multifunctional device in my office. Unfortunately, the printer is right next to where I sit - totally unfavourable - but there's no other room. Every now and then I come up against the off switch that flashes on the front - i.e. I have to switch the printer back on and avoid getting to it again.
A pain in the arse!
Now I didn't feel like it any more and thought of something: a small cap that you put directly over the on/off button to prevent the printer from being switched off accidentally. As there is very little space around the button I had to work with 0.5mm thick walls - after 4 misprints it finally worked.
Printed with 10% infill in PLA with 0.1 layer height, printing time incl. supports approx. 8 minutes.
If you then remove the supports cleanly, the cover fits on the switch-on button without pressure and without any problems. Then you can fold the flap up again and the whole thing stays in position.
✄ - - - - - - - - - - - - - - - - ✄
Ich habe hier einen HP Color Laser Jet Enterprise MFP M480 Multifunktionsgerät im Büro stehen. Leider ist der Drucker direkt neben meinem Sitzplatz - total Ungünstig - aber es ist sonst kein Platz. Ab und zu komme ich dann ungünstig gegen den Ausschalter der vorne auf der Vorderseite vor sich hin blinkt - d.h. den Drucker wieder einschalten und vermeiden wieder da dran zu kommen.
Nerv tötend !
Jetzt hatte ichfeine Lust mehr und habe mir was überlegt; und zwar eine kleine Kappe die man direkt über den Ein und Ausschaltknopf legt und somit wird verhindert das man ausversehen den Drucker abschaltet. Da rund um den Knopf nur wenig Platz ist musste ich mit 0,5mm dicken Wänden arbeiten - nach 4 Fehldrucken hatte es endlich gepasst.
Gedruckt mit 10% Infill in PLA mit 0,1er Schichthöhe, Druckzeit inkl Supports ca 8 Min.
Wenn man dann sauber die Supports entfernt passt die Abdeckung ohne Druck und ohne Probleme auf den Einschaltknopf. Dann kann man die Klappe wieder hoch klappen und das ganze hält in Position.
The author marked this model as their own original creation.