Festool Domino MFT Fixture

These 3D printed fixtures allow for the mounting of a Festool Domino DF500 floating tenon joint cutter to a Festool MFT table or similar table with 20mm diameter bench dog holes on a 96mm x 96mm grid spacing.  A stepped block is also provided to stabilize the setup and a V-block pattern is cut onto the side of one of the fixture blocks to allow for height adjustment of the Domino DF500 jointer in 2mm increments.

I developed this to cut dominos for drawer slides.

Recommended print settings:  PLA, 5 or more perimeters, 25% rectilinear infill.

Original CAD in OnShape here.

Follow me on Youtube for more 3D printed tooling and fixtures:
www.youtube.com/@amakerdad