This is a glue and screw station I had been working on and had some prototypes and adapted this for the MFT. The main body itself features holder for both round and oval glue bottles, I designed it around Titebond containers, but found other brands fit as well. In the main body is a one handed bottle opener as shown in photo, lock the bottle in and tug it open, also on the top of the body is a purge tray so you can get the glue started. When the glue is dry just remove it from the tray. As you can see bottle can be put in right side up or upside down at an angle to keep glue ready when you are gluing things up.
The secret sauce in this design is the implanted 60x10x3 mm bar magnets that you insert thru the back. To start I made a simple screw holder and pencil/pen holder. These also get the same magnets in them so that as you are working if you need to swap out trays of more screws you can. I built this functionality because I was using a jig and glue to build some surrounds and it allowed me to keep everything in reach.
My plan was that I would eventually add a rag holder and bit holders that can be swapped out easily.
I printed this in both PLA and PETG- PETG tends to be a little tighter on some of the fits, I found PLA due to the size of it pretty strong,
To achieve the best results, follow our recommended printing parameters:
It uses the same T-Nut mount as the Festool Bottle opener and bottle holder, you will need to print those to mount it.
You will also need the bar magnets if you want to use the optional side containers I used these: https://www.amazon.com/LOVIMAG-Strong-Neodymium-Magnets-Scientific/dp/B09TKB4GV9/ref=sr_1_3?crid=3J7G7S41STABG&dib=eyJ2IjoiMSJ9.rVtV2JWD2H3w1biCRzLh_CH7WLjuVNUgXI1qRfp-B7Y8jOmBuWhUHi7Llv5DzQZyBlDDUHxiT9E82FjowT1q50wJqVRq_NVCjcf_ohzsfDMa7OApJnGoUscnpNq5rONV9Oeg9QvJxqHzV1OJ6Gx_s5T4gIItlLucQMp_Ys4oz1-NY9yXC8Sk_Ze8nurOnjs7Bw09RTArrxwrZpFukkaaByV6ylE0hoU-VVuFiYavidA.-fZm3QilmtDZoilt2y4T26G_-jTiFsz2B3v3CW03zCI&dib_tag=se&keywords=bar%2Bmagnet%2B60x10x3%2Blovimag&qid=1736308261&sprefix=bar%2Bmagnet%2B60x10x3%2Blovimag%2Caps%2C83&sr=8-3&th=1
My hope is that if people enjoy this I will post my standalone version tuned up some and folks can make custom accessories for it.
The author marked this model as their own original creation.