V2 UPDATE IN PROGRESS - Storage Case with Tattoo Gun Kit and Blank Inserts

STEP BY STEP INSTRUCTIONS IN A PDF IN FILES!!

(I put a lot of time into them so plz use!)

note: not fully tested due waiting for filament to come!

Bill of Materials -------------------------------------------------------------

10 - M5x16mm Phillips Head Machine Screws

10 - M5xH9.5 Heat Inserts (Any Height shorter than 15 mm works)

4 - M3x16mm Phillips Head Machine Screws

4 - M3xH5 Heat Inserts (Any Height shorter than 15 mm works)

Super Glue! (For the top lid handle and drawer locking pins part A and B)

All parts will fit on a 220mm x 220 mm print bed!

Printing Tips ----------------------------------------------------------------

The inserts for the top and bottom are printed in TPU while the rest in any hard filament.

To do an accent color as shown the follow parts need to be separated and printed in the separate color -

drawer_locking_pin_Aside

drawer_locking_pin_Bside

Drawer

upper_case_lid_hinges_pair

upper_case_lid_lock

Update 1-8-24---------------------------------

Optional files were added splitting the top lid in two pieces to fit on a 220x220 mm print bed

V2 - Update - 5-6-25-----------------------------------------------------

in progress