Keychain Magnetic Bit Screwdriver Handle

Magnetic Keychain Screwdriver Handle for 1 or 2 bits. Magnetischer Schlüsselanh. Bit-Schraubendreher für 1 oder 2 Bits.
5
37
0
160
updated January 8, 2025

Description

PDF

I added magnets to the version of @Martom_2638517 so that the bits can be swapped and still don't fall out. As changing the files seemed too complicated, I completely redesigned the model in FreeCAD. Because of the magnets, the lengths of the individual parts have changed slightly compared to the original, but the total dimensions has remained the same.

Two round magnets with a diameter of 6 mm and a thickness of 3 mm are required. If you have other diameters (up to 10 mm), please contact me and I will add a corresponding version, but the magnets should not be thicker than 3 mm. The model can also be printed without magnets, the bits then should be fixed in some way, e.g. by gluing.

In the slicer (at a layer height of 0.2 mm), pause the print for inserting the magnets for the bottom part at layer 26 and for the middle part at layer 101.

To be printed without supports. To improve stability I used 25% infill (Gyroid).

I provide both STL and STEP files.

--------------------------------------------

Ich habe die Version von @Martom_2638517 mit Magneten versehen, so dass die Bits getauscht werden können und trotzdem nicht herausfallen. Da mir eine Veränderung der Dateien zu kompliztiert erschien, habe ich das Modell komplett neu in FreeCAD entwickelt. Durch die Magneten haben sich die Längen der einzelnen Teile gegenüber dem Original etwas verändert, die Gesamtabmessungen sind aber gleichgeblieben.

Benötigt werden zwei runde Magnete mit 6 mm Durchmesser und einer Dicke von 3 mm. Wer andere Durchmesser hat (bis zu 10 mm) kann mich gerne kontaktieren, dann füge ich eine entsprechende Version hinzu, die Magnete sollten allerdings nicht dicker als 3 mm sein. Das Modell kann aber auch ohne Magnete gedruckt werden, dann müssten die Bits aber irgendie festgesetzt werden, z.B. durch Einkleben.

Im Slicer (bei 0,2 mm Layerhöhe) für das Unterteil bei Schicht 26 und beim Mittelteil bei Schicht 101 jeweils eine Pause zum Einsetzen der Magneten vorsehen.

Zu drucken ohne Support. Um die Festigkeit zu erhöhen, habe ich 25% Infill (Gyroid) benutzt.

Ich stelle sowohl STL- als auch STEP-Dateien bereit.
 

Tags



Model origin

The author remixed this model.

Keychain Screwdriver Handle 2bit
by Martom
Original model was switched to draft or deleted

Differences of the remix compared to the original

Redesigned to include magnets to better hold the bits and allow for easy bit replacement.

Magnete hinzugefügt, um die Bits besser festzuhalten und den leichten Bitaustausch zu ermöglichen.

License