Practicals Philips Hue Bridge Rackmount V2 (With Lid)

Info
------------------------------------------------------------------
This is a rack mount V2 (with an top lid) for the Philips Hue Bridge (V2).
I used ShapR3D for modelling. Choose your Version (right or left).
Please use 6mm screws for the mounting in the rack. I used screw nuts in the recess.
The lid is firmly closed by the clips.

Print recommendation (worked for me)
------------------------------------------------------------------
Filament:   PLA, PLA +, PETG, ABS
Print infill density:  30% - 40%
Infill pattern:   Grid
Speed: 50-60 ms

Dimensions
------------------------------------------------------------------
Philips Hue Bridge square:  91 mm
Screw hole diameter:  5.5 mm
Hole spacing:   15 mm
Length:    110 mm
Width:    95 mm

Versions
------------------------------------------------------------------
V1 Version without top lid:
https://www.printables.com/model/1126982-practicals-philips-hue-bridge-rackmount-v1