My kids wanted microphones for a "production" they are working on. They also needed to glow in the dark. I used glowing yellow PLA and silver PLA with a simple pause in the print. Some stringing, but overall, a good print. No supports needed. Took about 5 hours for the pair.
Another great make!
I chose to print this one upside down in Mid-air. This way, I wouldn’t have to have supports all the way up to the top. Printed ir at 75% but probably should’ve printed it at 100%. Cheers!
great job!
I shrunk it and put a hole in it for the keychain. I solved the multiple colors by changing the filament.
Thanks for the design.
What an amazing make! great job!
Ohhh, this is beautiful, I have an inner feeling we are connected in our past. This beauty is like some monumental design I feel I made in another life time. Truly a masterpiece, oh, it’s so gorgeous.
@3Dmj If you wanted to, you could use tree supports, but you could also slice it at the head. either way, you'll need supports.
@3Dmj yeah, I know
