AX1 antenna Clamp Bracket

I print mine in ASA filament.  You can also print it in Petg.  Infill needs to be 100%.

You will need a BNC female to female bulkhead connector

1 M4 x 18mm bolt with nut and washer

1 M4 x 16mm bolt with nut and washer

1 M4 thumb nut

14 gage striped solid wire to make the trace between the bnc base and the counterpoise post.

Wire sits in the groove.

Also added a ¼-20 fitting to one of the Clamp bodies.  Some may like the feature.