RigExpert Zero II Box

This is a protective box for the RigExpert Zero II antenna analyzer.

If you print the box flat on it's bottom and the lid with the letters on the build plate then no supports are necessary.

Feed the Zero II antenna connector in first and the board will lock into place on the 4 pins.  The lid snaps in place for a secure fit. This box allows access to both the antenna connector and the USB port.
 

Zero II purchased at DX Engineering.
Download AntScope here.
Make sure your Zero II firmware is up to date.

After updating the firmware, run AntScope, connect the Zero II to the computer and then in the AntScope sofware.  Connect your antenna and enjoy.