Spoolholder wallmount

The wallmount is designed to mount spoolholders from Prusa for the i3 lineup, such as the basic spoolholder al the way up to the 2kg spoolholder. 
This mount is wide and strong enough to be used with a holder holding either 2x1kg or 1x2kg spools.

Note: Sometimes it is a bit hard to get a spoolholder mounted, i would suggest to slowly wiggle/ push it on from the side.

Print settings

Material: Petg
Layer height: 0.2mm
Infill pattern: Gyroid
Fill density: 40%
Supports: on