GPU Support 3 Designs + Magnet + Customizable

Heyhooo 

Here I have my design of a GPU Support 4 you :)

The Support (unscaled) can get around +20 mm height if you unscrew it.

3 Designs!
I have Design A, B and C for you. Furthermore you can customize the colors with multicolor printing if required.

Design A:

Design B:

Design C:

Magnet Inside!
You can add a Magnet to the holder so it stays in place even if you throw the PC around! 

I designed it to have a cavity for a magnet with  ≤ 10 mm diameter and ≥10 mm height. But if you unscrew the top part the magnet can be higher of course. 

Also keep in mind: If you rescale the model - The magnet could need other dimensions too!

All Sizes: Scaling!
Since you need no hardware you can scale the design to your requirements! Simply use your slicer to do that!
 

Only make sure that you always scale X and Y directions the same amount.
 

Here I scaled the 2 black versions down to 80% (All axis).

Lock the Height!

After setting the height under the GPU you can add the lock nut or add a small drop of Glue.

Alternatively you can measure the height between the PC Case and the GPU before you print the Support and scale it directly to the right height!
As a reference: The Designs height (closed) is 80,8 mm.

Optional: You can add a foam pad to the top if you like.

Printing Material:

I recommend to use PETG since PLA could sagg over time or get soft if your PC is on fire :D

I printed all parts 0,2 mm layer height but you can go smaller or bigger if you like to.

I hope you like my design!

Have fun!

 

Instagram: MeisterEdel