Xiegu G90 Vehicle Mount Sleeve for Wide Bracket

Xiegu G90 Vehicle Mount Sleeve for Wide Bracket snaps and screws onto the body of G90 radio using the finned sides of…
0
5
0
45
updated January 7, 2025

Description

PDF

Xiegu G90 Vehicle Mount Sleeve for Wide Bracket snaps and screws onto the body of G90 radio using the finned sides of the body to tightly mount the radio. The bracket can then be installed into a typical CB Radio Wide Bracket (full-size radio 7" wide bracket, at 180mm wide this fits my bracket well but could need slight adjustment for yours).

Print in wide (2-screw) or narrow (1 screw). Both hold the radio weight without even having the lower section attached just by snapping into place around the upper and side fin structures (see pic holding the radio up). Wide can be installed in two or more locations and lots of flexibility for where narrow is installed.

Print on side so radio fin structure is printed cleanly on walls by XY motions. Holes print without supports.

Mount hardware is M5x16 or M5x20 stainless cap screws. May need added length to get nut in place if you use a nut behind instead of threaded thru the PETG. The print size is adequate to thread directly if gently eased in with forward/backward threading action.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

**Rafts:**

No

Supports:

No

**Resolution:**

0.24mm

Infill:

100% or 99 walls

**Filament:** Overture PETG

Notes:

Print solid for structure. Brim will help keep shape and bed surface adhesion.
0.8mm or 1.0mm nozzle can be used for speed.

Category: Electronics

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License